上海地铁隧道建设中工程地质条件及主要地质问题研究

随着上海地铁隧道建设大规模的展开,建设中面临的工程地质问题日趋凸现。本文结合上海市特有的地质条件,分析了与地铁隧道建设相关的工程地质条件,包括工程地质结构特征及浅部含水层地下水位特征。在此基础上,对地铁车站基坑开挖以及区间隧道施工可能面临的工程地质问题进行了分析研究,绘制了市中心地区工程地质问题严重性程度分区图,可为工程设计、施工提供从参考依据。     

波涡相互作用研究的某些进展(Ⅱ)

<正> 5 波涡共振 从第3节的感受性问题再前进一步,自然要问在什么条件下入射波激发起涡中之波的最大响应.这就导致了入射波与层状或轴状涡中受激波之间共振的概念,简称波涡共振.一般说来,在流体内部若有两个或多个波相会,它们将互相穿透而沿原来的方向离去.但若它们的波矢量和频率满足一定的关系(参见Craik 1985),就会在相会点产生新的波.2阶扰动的振幅可达到1阶扰动振幅的量级,而且流场中会出现一些重要的独特性质.这就是流体内部波共振,波涡共振是其一类情形.      

非线性波动方程的新数值迭代方法

提出了一种新的求解非线性波动方程的数值迭代法,它是一种半解析的方法.与完全的数值计算方法扰法相比,它能够考虑各阶谐波的相互作用,且能够满足能量守恒定律.用它研究了非线性声波在液体中的传播性质,结果表明,在微扰法适用的声强范围内迭代法也适用,在微扰法不适用的一个较宽的声强范围内迭代法依然适用.     

Nonlinear sound and structure interaction in a fluid–filled flexible waveguide

In this study, a 2-D infinite flexible waveguide is considered. The waveguide carries a weakly nonlinear acoustic fluid. It is bounded on one side by a weakly nonlinear flexible membrane and the other side is rigid. The infinite waveguide is driven at the origin by a piston oscillating at a single frequency. However, we focus only on the positive side of the piston. As the coupled waves propagate in the membrane and the fluid, the modal interactions lead to resonances and beats which form the main focus of this work. A regular perturbation method is used to derive the linear and the quasilinear order equations which are then solved. At the linear order, the primary wavenumbers are solved for and the modes are found to be non-orthogonal because of the flexible membrane. Only the propagating waves are included in the analysis. Both self-mode and cross-mode interactions of the planar and the non-planar modes are considered. The novelty of this work lies in obtaining conditions and the closed form solutions for the resonances and beats along the spatial coordinate. It is found that the self-mode interactions lead to beats only. And in the self-mode interactions, the coupled planar mode plays an important role. On the other hand, the cross-mode interactions can lead to either resonances or beats.     

Full-wave numerical simulation of nonlinear dissipative acoustic standing waves in wind instruments

A finite volume full-wave method is used to simulate nonlinear dissipative acoustic propagation in ducts with a circular cross-section. Thermoviscous dissipative effects, due to bulk viscosity and shear viscosity in the boundary layer adjacent to the duct walls, are also considered. The propagation is assumed to be axisymmetric, and two different geometries are considered: a straight cylindrical tube, and a cylindrical tube joined smoothly to a slowly-flaring bell. Of special interest is the study of the onset of standing waves in the nonlinear regime. The full-wave numerical scheme is particularly well-adapted for this purpose, as it is not necessary to impose boundary conditions at the open end of the duct. A simplified model of excitation is adopted, where the lips are replaced by a spring–mass system which behaves like a pressure valve with a single degree of freedom. The full system behaves as expected, with a feedback cycle established between the pressure valve and the air column. The simulation is validated successfully in the linear regime using a theoretical solution. It is shown that increasing the stiffness of the lips leads to discrete jumps in playing frequency, which is behaviour typical of brass instruments. In the nonlinear regime, shock formation is observed for sufficiently high amplitudes of oscillation, and the radiation of these shock waves by the open end of the ducts can be visualised in the time-domain, along with edge-diffraction effects. The formation and evolution of standing waves in the nonlinear regime, where the effect of these shocks is very noticeable, is also examined.     

The Acoustics of Liquid Foams

Beside other transport properties of liquid foams, like the optical or electrical ones, the acoustics of liquid foams reveals a great complexity and non-trivial features. Here we present a review of recent experimental and theoretical results on how a sound wave interacts with either a macroscopic foam sample or with its isolated building blocks (films and Plateau borders). The analysis of the literature allows us to determine what is now well understood, what could be measured in foams by acoustics, and what are the remaining issues and perspectives in this research field.     

An explicit time-domain finite element method for room acoustics simulations: Comparison of the performance with implicit methods

This paper presents the applicability of an explicit time-domain finite element method (TD-FEM) using a dispersion reduction technique called modified integration rules (MIR) on room acoustics simulations with a frequency-independent finite impedance boundary. First, a dispersion error analysis and a stability analysis are performed to derive the dispersion relation and the stability condition of the present explicit TD-FEM for three-dimensional room acoustics simulations with an infinite impedance boundary. Secondly, the accuracy and efficiency of the explicit TD-FEM are presented by comparing with implicit TD-FEM using MIR through room acoustics simulations in a rectangular room with infinite impedance boundaries. Thirdly, the stability condition of the explicit TD-FEM is investigated numerically in the case with finite impedance boundaries. Finally, the performance of the explicit TD-FEM in room acoustics simulations with finite impedance boundaries is demonstrated in a comparison with the implicit TD-FEM. Although the stability of the present explicit TD-FEM is dependent on the impedance values given at boundaries, the explicit TD-FEM is computationally more efficient than the implicit method from the perspective of computational time for acoustics simulations of a room with larger impedance values at boundaries.     

Study of the uncertainty of façade sound insulation measurements: Analysis of the ISO 12999-1 uncertainty proposal

The result of a measurement is an approximation of the true value of the measurand and is complete when it is accompanied by its uncertainty. Building acoustics requires an assessment of the uncertainties that is understandable and corresponds closely to reality. The new standard ISO 12999-1 gives general uncertainty values for typical sound insulation measurements. The objective of this work is to determine the most accurate method for evaluating the uncertainty of in situ façade sound insulation measurements for both the D_ls,2m,nT values in one-third octave bands and the global magnitude D_ls,2m,nT,w. We establish a comparative analysis between the uncertainty values proposed by the standard ISO 12999-1, the uncertainty values deduced from interlaboratory activities and the average uncertainties deduced from individual calculations for each in situ measurement. The comparison is based on uncertainty calculations for around 1000 in situ façade sound insulation measurements made by our laboratory. The uncertainties given by the standard ISO 12999-1 for D_ls,2m,nT in one-third octave bands are, at low and high frequencies, higher than the values deduced from individual calculations and smaller than the calculated values at mid frequencies. We believe that for D_ls,2m,nT, it is advisable wherever possible to make individual uncertainty calculations for each in situ façade measurement. Nevertheless, the comparison with ISO 12999-1 points to the suitability of including some uncertainty components in the calculation, such as the related to the measurement procedure or source directivity, which are not normally considered in the uncertainty evaluation. Although we have clearly endorsed the use of individual calculations to determine the uncertainty of the sound insulation magnitude in one-third octave bands, we believe the uncertainty proposed by standard ISO 12999-1 could be a more realistic and reasonable approximation for the global magnitude D_ls,2m,nT,w. Therefore if an individual calculation of the uncertainty of the global magnitude is required the Monte Carlo simulation has been shown to be a good method.     

一维非线性声波传播特性

针对一维非线性声波的传播问题进行了有限元仿真和实验研究. 首先推导了一维非线性声波方程的有限元形式, 含有高阶矩阵的非线性项导致声波具有波形畸变、谐波滋生、基频信号能量向高次谐波传递等非线性特性. 编制有限元程序对一维非线性声波进行了计算并对仿真得到的畸变非线性声波信号进行处理, 分析其传播性质和物理意义. 为验证有限元计算结果, 开展了水中的非线性声波传播的实验研究, 得到了不同输入信号幅度激励下和不同传播距离的畸变非线性声波信号. 然后对基波和二次谐波的传播性质进行详细讨论, 分析了二次谐波幅度与传播距离和输入信号幅度的变化关系及其意义, 拟合出二次谐波幅度随传播距离变化的方程并阐述了拟合方程的物理意义. 结果表明, 数值仿真信号及其频谱均与实验结果有较好的一致性, 证实计算方法和结果的正确性, 并提出了具有一定物理意义的二次谐波随传播距离变化的简单数学关系. 最后还对固体中的非线性声波传播性质进行了初步探讨. 本研究工作可为流体介质中的非线性声传播问题提供理论和实验依据.     

A two-dimensional nonlinear model for the generation of stable cavitation bubbles

Bubbles appear by acoustic cavitation in a liquid when rarefaction pressures attain a specific threshold value in a liquid. Once they are created, the stable cavitation bubbles oscillate nonlinearly and affect the ultrasonic field. Here we present a model developed for the study of bubble generation in a liquid contained in a two-dimensional cavity in which a standing ultrasonic field is established. The model considers dissipation and dispersion due to the bubbles. It also assumes that both the ultrasonic field and the bubble oscillations are nonlinear. The numerical experiments predict where the bubbles are generated from a population of nuclei distributed in the liquid and show how they affect the ultrasonic field.